Back to the Journal

Complete-arch fixed reconstruction by means of guided surgery and immediate loading: a retrospective clinical study on 12 patients with 1 year of follow-up

June 16, 2020 / Categories: Digital Dentistry, Implant Dentistry

Lener, Henriette

Hauschild, Uli

Sader, Robert

Ghanaati, Shahram

Table of Contents

• Abstract
  • Background
  • Methods
  • Results
  • Conclusions
  • Keywords:
• Background
• Methods
• Results
• Discussion
• Conclusions

Background

The immediate functional loading of implant-supported, fixed full-arch prostheses can today represent a predictable solution for the rehabilitation of edentulous patients,1–3 even in the case of implant placement in fresh post-extraction sockets.¹Peñarrocha-Oltra D, Covani U, Aparicio A, Ata-Ali J, Peñarrocha-Diago M, Peñarrocha-Diago M. Immediate versus conventional loading for the maxilla with implants placed into fresh and healed extraction sites to support a full-arch fixed prosthesis: non-randomized controlled clinical study. Int J Oral Maxillofac Implants. 2013;28(4):1116–24.

Such procedures as immediate prosthetic loading and immediate placement of implants in fresh extraction sockets are highly appreciated by patients, because they reduce the invasiveness and the number of surgical and prosthetic sessions, as well as the length of time needed for treatment.²Mello CC, Lemos CAA, Verri FR, Dos Santos DM, Goiato MC, Pellizzer EP. Immediate implant placement into fresh extraction sockets versus delayed implants into healed sockets: A systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2017;46(9):1162–77.^,3Cercadillo-Ibarguren I, Sánchez-Torres A, Figueiredo R, Valmaseda-Castellón E. Bimaxillary simultaneous immediate loading of full-arch restorations: A case series. J Clin Exp Dent. 2017;9(9):e1147–52.

However, the immediate placement of implants in post-extraction sockets and their immediate functionalization in a complete-arch reconstruction represent a serious challenge for clinicians.⁴Peñarrocha-Oltra D, Covani U, Peñarrocha M, Peñarrocha-Diago M. Immediate versus conventional loading with fixed full-arch prostheses in mandibles with failing dentition: a prospective controlled study. Int J Oral Maxillofac Implants. 2015;30(2):427–34.^,5Peñarrocha-Oltra D, Covani U, Aparicio A, Ata-Ali J, Peñarrocha-Diago M, Peñarrocha-Diago M. Immediate versus conventional loading for the maxilla with implants placed into fresh and healed extraction sites to support a full-arch fixed prosthesis: non-randomized controlled clinical study. Int J Oral Maxillofac Implants. 2013;28(4):1116–24.^,6Cercadillo-Ibarguren I, Sánchez-Torres A, Figueiredo R, Valmaseda-Castellón E. Bimaxillary simultaneous immediate loading of full-arch restorations: A case series. J Clin Exp Dent. 2017;9(9):e1147–52. Surgically, in fact, clinicians must be able to mentally visualize the future prosthetic rehabilitation and, consequently, the ideal position and axis of implant insertion; in a rather large field such as that of the edentulous maxilla or mandible, this can be particularly complex.⁷Peñarrocha-Oltra D, Covani U, Peñarrocha M, Peñarrocha-Diago M. Immediate versus conventional loading with fixed full-arch prostheses in mandibles with failing dentition: a prospective controlled study. Int J Oral Maxillofac Implants. 2015;30(2):427–34.^,8Peñarrocha-Oltra D, Covani U, Aparicio A, Ata-Ali J, Peñarrocha-Diago M, Peñarrocha-Diago M. Immediate versus conventional loading for the maxilla with implants placed into fresh and healed extraction sites to support a full-arch fixed prosthesis: non-randomized controlled clinical study. Int J Oral Maxillofac Implants. 2013;28(4):1116–24^,9Cercadillo-Ibarguren I, Sánchez-Torres A, Figueiredo R, Valmaseda-Castellón E. Bimaxillary simultaneous immediate loading of full-arch restorations: A case series. J Clin Exp Dent. 2017;9(9):e1147–52. Furthermore, it may be difficult to obtain adequate primary stability when placing implants in post-extraction sockets.¹⁰Peñarrocha-Oltra D, Covani U, Peñarrocha M, Peñarrocha-Diago M. Immediate versus conventional loading with fixed full-arch prostheses in mandibles with failing dentition: a prospective controlled study. Int J Oral Maxillofac Implants. 2015;30(2):427–34.^,11Peñarrocha-Oltra D, Covani U, Aparicio A, Ata-Ali J, Peñarrocha-Diago M, Peñarrocha-Diago M. Immediate versus conventional loading for the maxilla with implants placed into fresh and healed extraction sites to support a full-arch fixed prosthesis: non-randomized controlled clinical study. Int J Oral Maxillofac Implants. 2013;28(4):1116–24^,12Cercadillo-Ibarguren I, Sánchez-Torres A, Figueiredo R, Valmaseda-Castellón E. Bimaxillary simultaneous immediate loading of full-arch restorations: A case series. J Clin Exp Dent. 2017;9(9):e1147–52.^,13Hsu JT, Wu AY, Fuh LJ, Huang HL. Effects of implant length and 3D bone-to-implant contact on initial stabilities of dental implant: a microcomputed tomography study. BMC Oral Health. 2017;17(1):132. These mental and clinical difficulties may result in a non-optimal placement of the implants.¹⁴Peñarrocha-Oltra D, Covani U, Aparicio A, Ata-Ali J, Peñarrocha-Diago M, Peñarrocha-Diago M. Immediate versus conventional loading for the maxilla with implants placed into fresh and healed extraction sites to support a full-arch fixed prosthesis: non-randomized controlled clinical study. Int J Oral Maxillofac Implants. 2013;28(4):1116–24^,15Cercadillo-Ibarguren I, Sánchez-Torres A, Figueiredo R, Valmaseda-Castellón E. Bimaxillary simultaneous immediate loading of full-arch restorations: A case series. J Clin Exp Dent. 2017;9(9):e1147–52.

This non-optimal positioning, even if it does not lead to the violation of anatomical risk structures (such as the inferior alveolar nerve and the maxillary sinus), can have serious esthetic consequences, and may force the prosthodontist to seek compromise rehabilitative solutions that might not be appreciated by the patient.¹⁶Papaspyridakos P, Mokti M, Chen CJ, Benic GI, Gallucci GO, Chronopoulos V. Implant and prosthodontic survival rates with implant fixed complete dental prostheses in the edentulous mandible after at least 5 years: a systematic review. Clin Implant Dent Relat Res. 2014;16(5):705–17.^,17Peñarrocha-Oltra D, Covani U, Aparicio A, Ata-Ali J, Peñarrocha-Diago M, Peñarrocha-Diago M. Immediate versus conventional loading for the maxilla with implants placed into fresh and healed extraction sites to support a full-arch fixed prosthesis: non-randomized controlled clinical study. Int J Oral Maxillofac Implants. 2013;28(4):1116–24.^,18Mello CC, Lemos CAA, Verri FR, Dos Santos DM, Goiato MC, Pellizzer EP. Immediate implant placement into fresh extraction sockets versus delayed implants into healed sockets: A systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2017;46(9):1162–77.^,19Cercadillo-Ibarguren I, Sánchez-Torres A, Figueiredo R, Valmaseda-Castellón E. Bimaxillary simultaneous immediate loading of full-arch restorations: A case series. J Clin Exp Dent. 2017;9(9):e1147–52.^,20Hsu JT, Wu AY, Fuh LJ, Huang HL. Effects of implant length and 3D bone-to-implant contact on initial stabilities of dental implant: a microcomputed tomography study. BMC Oral Health. 2017;17(1):132.^,21Javaheri D. Achieving Anterior Aesthetics in a Full-Arch Implant Case. Dent Today. 2016;35(1):118 120–1. In fact, it is known from the literature how the esthetics, survival, and long-term success of implant-supported restorations depend not solely on the volume of bone and mucosal tissues available, but also on other parameters, including the implant insertion axis.²²Mangano FG, Mastrangelo P, Luongo F, Blay A, Tunchel S, Mangano C. Aesthetic outcome of immediately restored single implants placed in extraction sockets and healed sites of the anterior maxilla: a retrospective study on 103 patients with 3 years of follow-up. Clin Oral Implants Res. 2017;28(3):272–82.^,23Buser D, Martin W, Belser UC. Optimizing esthetics for implant restorations in the anterior maxilla: anatomic and surgical considerations. Int J Oral Maxillofac Implants. 2004;19(Suppl):43–61.^,24Link-Bindo EE, Soltys J, Donatelli D, Cavanaugh R. Common Prosthetic Implant Complications in Fixed Restorations. Compend Contin Educ Dent. 2016;37(7):431–6 quiz 439.^,25Khzam N, Arora H, Kim P, Fisher A, Mattheos N, Ivanovski S. Systematic Review of Soft Tissue Alterations and Esthetic Outcomes Following Immediate Implant Placement and Restoration of Single Implants in the Anterior Maxilla. J Periodontol. 2015;86(12):1321–30.

Modern digital technologies,²⁶Mangano F, Shibli JA, Fortin T. Digital Dentistry: New Materials and Techniques. Int J Dent. 2016;2016:5261247. in particular guided implant surgery²⁷Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,28D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,29Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.now offer a solution to these problems. Conceived in the mid-nineties, guided implant surgery has rapidly grown in popularity, and is now widely used all over the world.³⁰Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,31D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,32Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150. The introduction of cone-beam computed tomography (CBCT) allowed the acquisition of the three-dimensional (3D) bone volumes of the jaws in a simple way and with a considerable reduction in the dose of radiation absorbed by the patient, compared to that of conventional computerized tomography.³³Bornstein MM, Scarfe WC, Vaughn VM, Jacobs R. Cone beam computed tomography in implant dentistry: a systematic review focusing on guidelines, indications, and radiation dose risks. Int J Oral Maxillofac Implants. 2014;29(Suppl):55–77.^,34Bornstein MM, Horner K, Jacobs R. Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research. Periodontol. 2017;73(1):51–72.

The information on the patient’s bone anatomy, captured by CBCT, may be imported as digital imaging and communication in medicine (DICOM) files into specific software for implant surgery planning and combined with the wax-up of the ideal prosthetic restoration.14–18 In this software, the surgeon can plan the implant insertion, based on the anatomy of the residual bone and the ideal prosthetic project. According to the planning, a surgical guide is drawn, produced with additive techniques, and used during the implantation for the guided placement of the fixtures.³⁵Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,36D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,37Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.^,38Bornstein MM, Scarfe WC, Vaughn VM, Jacobs R. Cone beam computed tomography in implant dentistry: a systematic review focusing on guidelines, indications, and radiation dose risks. Int J Oral Maxillofac Implants. 2014;29(Suppl):55–77.^,39Bornstein MM, Horner K, Jacobs R. Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research. Periodontol. 2017;73(1):51–72.^,40Bell CK, Sahl EF, Kim YJ, Rice DD. Accuracy of Implants Placed with Surgical Guides: Thermoplastic Versus 3D Printed. Int J Periodontics Restorative Dent. 2018;38(1):113–9.

In 2002, the concept of guided implant planning linked to immediate functional loading was first introduced in Leuven, Belgium. The first treatments were limited to the edentulous jaws and required full-thickness flaps, as the surgical tem- plates were bone-supported. ⁴¹Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,42D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,43Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.^,44Bornstein MM, Scarfe WC, Vaughn VM, Jacobs R. Cone beam computed tomography in implant dentistry: a systematic review focusing on guidelines, indications, and radiation dose risks. Int J Oral Maxillofac Implants. 2014;29(Suppl):55–77.^,45Bornstein MM, Horner K, Jacobs R. Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research. Periodontol. 2017;73(1):51–72.^,46Bell CK, Sahl EF, Kim YJ, Rice DD. Accuracy of Implants Placed with Surgical Guides: Thermoplastic Versus 3D Printed. Int J Periodontics Restorative Dent. 2018;38(1):113–9. Subsequently, planning procedures have been optimized, opening the way for new types of increasingly precise surgical templates, with mucosal and dental support, to be used in both arches, in partially and completely edentulous subjects.⁴⁷Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,48D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,49Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.^,50Bornstein MM, Scarfe WC, Vaughn VM, Jacobs R. Cone beam computed tomography in implant dentistry: a systematic review focusing on guidelines, indications, and radiation dose risks. Int J Oral Maxillofac Implants. 2014;29(Suppl):55–77.^,51Bornstein MM, Horner K, Jacobs R. Use of cone beam computed tomography in implant dentistry: current concepts, indications and limitations for clinical practice and research. Periodontol. 2017;73(1):51–72.^,52Bell CK, Sahl EF, Kim YJ, Rice DD. Accuracy of Implants Placed with Surgical Guides: Thermoplastic Versus 3D Printed. Int J Periodontics Restorative Dent. 2018;38(1):113–9. The possibility of a flapless approach has further increased the benefits of guided surgery, as this approach reduces the invasiveness and timing of surgical treatment, simplifying the procedure for the clinician and reducing discomfort and morbidity for the patient.⁵³Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901.^,54Jesch P, Jesch W, Bruckmoser E, Krebs M, Kladek T, Seemann R. An up to 17-year follow-up retrospective analysis of a minimally invasive, flapless approach: 18 945 implants in 7783 patients. Clin Implant Dent Relat Res. 2018;20(3):393–402

However, in most clinical studies in the literature, full-arch restorations are represented by Toronto Bridges, also known as “all-on-four” and “all-on-six” dentures, i.e., hybrid fixed prostheses characterized by the presence of a bar connecting the implants and, more importantly, artificial gum (either in porcelain or in resin, depending by the restorative treatment chosen).⁵⁵Daas M, Assaf A, Dada K, Makzoumé J. Computer-Guided Implant Surgery in Fresh Extraction Sockets and Immediate Loading of a Full-Arch Restoration: A 2-Year Follow-Up Study of 14 Consecutively Treated Patients. Int J Dent. 2015;2015:824127.^,56Browaeys H, Dierens M, Ruyffelaert C, Matthijs C, De Bruyn H, Vandeweghe S. Ongoing Crestal Bone Loss around Implants Subjected to Computer-Guided Flapless Surgery and Immediate Loading Using the All-on-4® Concept. Clin Implant Dent Relat Res. 2015;17(5):831–43.^,57Yamada K, Hoshina H, Arashiyama T, Arasawa M, Arai Y, Uoshima K, Tanaka M, Nomura S. Immediate implant loading following computer-guided surgery. J Prosthodont Res. 2011;55(4):262–5.^,58Allum SR. Immediately loaded full-arch provisional implant restorations using CAD/CAM and guided placement: maxillary and mandibular case reports. Br Dent J. 2008;204(7):377–81. There is no doubt that even in this context, guided implant surgery offers advantages, such as more precise implant placement, especially with respect to the screw holes, and the availability to pre-fabricate a milled provisional for same- (or next-) day delivery.⁵⁹Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,60D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,61Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.^,62Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901.^,63Daas M, Assaf A, Dada K, Makzoumé J. Computer-Guided Implant Surgery in Fresh Extraction Sockets and Immediate Loading of a Full-Arch Restoration: A 2-Year Follow-Up Study of 14 Consecutively Treated Patients. Int J Dent. 2015;2015:824127.^,64Browaeys H, Dierens M, Ruyffelaert C, Matthijs C, De Bruyn H, Vandeweghe S. Ongoing Crestal Bone Loss around Implants Subjected to Computer-Guided Flapless Surgery and Immediate Loading Using the All-on-4® Concept. Clin Implant Dent Relat Res. 2015;17(5):831–43.^,65Yamada K, Hoshina H, Arashiyama T, Arasawa M, Arai Y, Uoshima K, Tanaka M, Nomura S. Immediate implant loading following computer-guided surgery. J Prosthodont Res. 2011;55(4):262–5.^,66Allum SR. Immediately loaded full-arch provisional implant restorations using CAD/CAM and guided placement: maxillary and mandibular case reports. Br Dent J. 2008;204(7):377–81. However, these types of implant-supported dentures, although easier to manage for clinicians, cannot represent the maximum of esthetics, precisely because of the presence of the artificial gum.⁶⁷Montero J, Macedo de Paula C, Albaladejo A. The “Toronto prosthesis”, an appealing method for restoring patients candidates for hybrid overdentures: A case report. J Clin Exp Dent. 2012;4(5):e309–12.^,68Ata-Ali J, Flichy-Fernández AJ, Alegre-Domingo T, Ata-Ali F, Palacio J, Peñarrocha-Diago M. Clinical, microbiological and immunological aspects of healthy versus periimplantitis tissue in full-arch reconstruction patients: a prospective cross-sectional study. BMC Oral Health. 2015;15:43. Moreover, the correct maintenance of daily oral hygiene can be much more difficult for the patient with such types of prosthetic rehabilitation. ⁶⁹Montero J, Macedo de Paula C, Albaladejo A. The “Toronto prosthesis”, an appealing method for restoring patients candidates for hybrid overdentures: A case report. J Clin Exp Dent. 2012;4(5):e309–12.^,70Ata-Ali J, Flichy-Fernández AJ, Alegre-Domingo T, Ata-Ali F, Palacio J, Peñarrocha-Diago M. Clinical, microbiological and immunological aspects of healthy versus periimplantitis tissue in full-arch reconstruction patients: a prospective cross-sectional study. BMC Oral Health. 2015;15:43.

Today there are few scientific works on complete-arch fixed reconstruction without artificial gum, by means of guided surgery with flapless placement of implants also in post-extraction sockets, and immediate functional loading.⁷¹Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.^,72Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuideTM system. Clin Implant Dent Relat Res. 2015;17(2):221–33.^,73Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.^,74Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423.

The aim of the present study is therefore to present the outcome of guided surgery, flapless implant placement, and immediate functional loading of complete-arch fixed prostheses without artificial gum. In particular, we aim to demonstrate how a correct planning of the 3D positioning of the implants allows to obtain complete-arch fixed rehabilitations with highly predictable esthetics.

Methods

Patient selection
A retrospective evaluation was conducted on the customized records of patients that were treated with guided implant surgery during the period from January 2014 to December 2017, in a private dental clinic in Baden-Baden, Germany (Henriette Lerner Dental Clinic). Patients were included according to the following criteria.

Inclusion criteria:

• Adult and able to provide informed consent;
• Patients in need to tooth extraction and immediate implantation;
• Patients that recieved flapless guided surgery and complete-arch fixed prostheses without artificial gum;
• Patients, that were followed up for at least 1 year.

Exclusion criteria:

• Patients with any other prosthetic rehabilitation than complete-arch fixed prostheses without artificial gum.

The analyzed records included patient-related information (gender, age at surgery, systemic health, smoking habit) details about the inserted implants (type, position, length, and diameter) and the prosthetic rehabilitation (single crown, fixed partial prosthesis, fixed full arch) including the dates of delivery. In addition, the analyzed data included all information about any implant failure or complication that occurred during the intervention, after the surgery, and at each follow-up visit. According to the inclusion and exclusion criteria, only patients treated with guided implant surgery and immediate loading by means of complete-arch fixed reconstruction without artificial gum were considered eligible and thus enrolled in the study. A necessary condition for enrollment in the present study was also the patient’s willingness to present him/herself at a final control visit. All other patients (i.e., patients treated with dental implants to restore partially or totally edentulous jaws, without the aid of guided surgery; or patients treated with guided implant surgery but restored with fixed full-arch maxillary prostheses with artificial gum) were excluded from this study. The principles highlighted in the Helsinki Declaration on experimentation on human subjects were strictly followed. This retrospective study received ethical approval from the Institutional Review Board of the Goethe University of Frankfurt, Germany (number: 182/ 19). All patients were fully informed on the nature of this retrospective study, read and signed a written consent form for inclusion, and for the analysis of their records, that was approved by the University. In addition, the authors obtained written consent for publication from the patients enrolled in this retrospective study.

Data acquisition
A complete clinical, photographic, and radiographic dataset was acquired for each patient. In particular, photographs of the initial situation were taken (Fig. 1a, b, c, d, e) accompanied by two-dimensional (panoramic) radiographs (Fig. 1f), periodontal probing and three-dimensional radiographs (CBCT of both arches). General impressions were taken, and stone casts were obtained for the study of the case (Fig. 1g, h). Starting from the photographic data, a digital smile-design software was used for a first evaluation of the length and width of the teeth. The information taken from this analysis was used for the preparation of a diagnostic wax-up on the stone cast models (Fig. 2a, b, c). Finally, the initial situation, the diagnostic wax-up (and therefore the ideal morphology of the teeth) and the situation after virtual extractions were then scanned with a desktop scanner (Deluxe®, Open Technologies srl, Brescia, Italy), in order to have all the. STL files available for upload in the guided surgery software (Fig. 2d).

Digital implant planning and laboratory workflow
In a guided surgery software, the. STL files with the ideal teeth morphology, derived from the scan of the diagnostic wax-up, were imported and superimposed on the bone anatomy, obtained from the CBCT. Then, the surgeon (H.L.) and the dental technician (U.H.) were able to plan the placement of the implants in the correct position, depth, and inclination, guided by the prosthetic wax-up, in a prosthetically-driven manner (Fig. 3a, b, c, d). Care was taken to try to engage the fixtures as much as possible in the residual bone, exceeding the apex of fresh extraction sockets at least 3–4 mm, by choosing appropriate implant length. At the same time, care was taken to position the implants in the palatal portion of the sockets, ideally at a distance of 2–3mm from the residual buccal bone walls, and at a proper inclination. Ideally the axis of the implants had to be in the center of the teeth, to achive a perfect prosthetic plan. The same procedure was repeated in both maxilla and mandible. After the planning was successfully completed and carefully controlled, the models of the situation were 3D printed in the laboratory with a desktop printer and the implant analogues were inserted in these models (Fig. 4a, b). These models not only included the correct position of the planned implants, but also the mucosa and the residual teeth, which had not been removed in the planning, in order to facilitate the superimposition in the guided surgery software and to stabilize the surgical guide during the intervention (these hopeless teeth had to be removed at the end of the intervention). Based on the virtual planning, surgical guides were then printed, and the sleeves were manually inserted in (Fig. 4c, d). In the lower jaw, since the sleeves of the central incisors touched each other, two different guides were 3D printed. Finally, before surgery, provisional full-arch restorations were prepared for immediate loading and aesthetics. A burn-out framework based on the prosthetic project and virtual implant position was milled (Fig. 5a, b). This led to a metal structure on which resin composite (Nexco®, Ivoclar Vivadent, Schaan, Liechtestein) was manually stratified, in order to obtain a highly aesthetic temporary full-arch prosthesis for immediate loading (Fig. 5c). This prosthesis had to be seated on temporary abutments immediately after implant placement.

Fig. 1
Pre-operative initial situation. Lateral (a) and frontal (b) view of a 32-year-old female patient, in good systemic health, presented with an advanced chronic periodontitis, teeth mobility and recurrent infections, persisting over years. In the upper jaw, in particular, all teeth were sensitive and elongated and this seriously compromised the function and the aesthetic of the smile. The patient suffered from this situation and she was strongly motivated to solve this biological, functional and aesthetic problem. (c) Frontal and (d, e) lateral intraoral pictures. (f) Panoramic radiograph. In the maxilla, the severe chronic periodontitis determined an advanced bone loss, that compromised the stability of all teeth. (g) Upper and (h) lower jaw precision models

Fig. 2
Digital smile design and diagnostic wax-up. a Starting from the photographic data, a digital smile design software was used for a first evaluation of the length and width of the teeth. The smile design indicated the need to increase the length and the width of the patient’s teeth, particularly in the anterior maxilla. There was a need to modify the teeth shape as well. b The information taken from the smile design was then used for the preparation of a diagnostic wax-up. c The models were mounted in articulator and the indications of the smile design were manually replicated in the wax-up. d The initial situation, the wax-up and the situation after extractions were then scanned with a desktop scanner (Deluxe®, Open Technologies srl, Brescia, Italy), in order to have all the. STL files available for upload in the guided surgery software

Fig. 3
Prosthetically driven 3D implant planning. a In a guided surgery software (RealGuide®, 3Diemme, Como, Italy) the. STL file with the ideal teeth morphology (model of the maxilla with included wax-up) was imported and superimposed on the bone anatomy, obtained from the CBCT. Ten immediate post-extraction implants (#16, #14, #13, #12, #11, #21, #22, #23, #24, #26) were planned in the cross sections of the CBCT (placement of #16 and #26 required maxillary sinus augmentation). The implant position, inclination and depth were carefully planned, trying to engage the fixtures as much as possible into the bone, to increase primary implant stability in the fresh extraction sockets, and taking into account the emergence profile and the overlying future prosthesis, so that implants were placed in a prosthetically driven matter. The final prosthetic plan foresaw rehabilitation with single crowns in the frontal area (from #14 to #24) and rehabilitation with partial fixed prosthesis for the posterior sectors (from #15 to #17, and from #25 to #27, respectively). b A similar procedure was performed in the mandible, with the superimposition of the. STL file with the ideal teeth morphology on the bone, and therefore the implant planning. Six implants were originally planned (#47, #46, #41, #31, #35, #37) in the cross sections of the CBCT. Once again, the implant position, inclination and depth were carefully planned, trying to engage the fixtures as much as possible into the bone, to increase primary implant stability, and taking into account the emergence profile and the overlying future prosthesis, so that implants were placed in a prosthetically driven position. c, d Visualization of the implant emergence profiles in relation to the ideal position of the teeth and the prosthetic plan, in the maxilla and mandible. The prosthetic axes of the posterior implants emerged in the masticatory center of each tooth, in the anterior individual zirconia abutments cemented on titanium bases were chosen. On the upper jaw ten implants were planned, on the lower jaw six

Implant type
The implants used in this study (Esthetic Line-EL®, CTech, Bologna, Italy) were conical, with a Morse-taper hexed connection and an acid-etched surface. In details, these implants incorporate three different threading profiles, designed to adapt to the different bone structures that occurr along the depth of the fixture. In the coronal portion, in fact, microgrooving is present, whereas in the intermediate portion, the fixtures present a double lead thread, to facilitate insertion and to increase primary stability, particularly in soft bone. In the apical portion, these implants are endowed with aggressive apical threading which is particularly indicated to stabilize the fixture in post-extraction sockets, in the case of immediate placement after extraction; however, a rounded apex protects such anatomical structures as the maxillary sinus membrane and inferior alveolar nerve. Further characteristics of these implants are a beveled shoulder, to facilitate bone growth in the case of subcrestal placement in post-extraction sockets; a Morse-taper hexed connection, to reduce screw loosening and micromovements of the abutment; and a concave aesthetic concept with platform switching, for better soft-tissue healing. The presence of one connection for all implant diameters facilitates the prosthetic treatment, by offering a large range of tissue-shaping possibilities. The fixtures used in this study were available in different lengths (8,9,10,11,12, 13, and 14mm) and diameters (3.8, 4.3, 5.1, 6, and 7mm).

Fig. 4
3D printing of the models and the surgical guides. a, b The models were printed in the laboratory with a 3D printer (Form2®, Formlabs Inc., Somerville, MA, USA) and the implant analogues were positioned. These models not only included the correct position of the planned implants, but also the mucosa and the residual teeth, that have not been removed in the planning, in order to facilitate the superimposition in the guided surgery software, and to stabilize the surgical guide during the intervention. The compromised teeth had to be subsequently removed during surgery. c, d 3D printing of the models and the surgical guides. Based on the virtual planning, surgical guides were printed too. The sleeves were then inserted in the guides. In the lower jaw, since the sleeves of the incisors touched each other, two different guides were 3D printed

Surgical and prosthetic treatment
After this, flapless surgery could start with the atraumatic extraction of all hopeless teeth (with the exception of the ones used to stabilize the guide; those teeth had to be removed after the removal of the guide). During extraction, care was taken not to damage the alveoli and particularly the delicate maxillary buccal bone wall (Fig. 6a, b). After the digital planning, the surgical template was positioned, the fit was carefully checked (Fig. 6c), and the guided surgery started with the preparation of all implant sites, using drills of incremental diameter, and ended with the placement of all planned implants, through the guide (Fig. 6d, e). After implant placement, the surgeon could verify the positioning as well as the soft-tissue status and proceed with simultaneos minor/major grafting procedures, where needed. The need for grafting procedures obviously forced the clinician to raise a full-thickness flap, but this procedure was limited exclusively to the area or areas that required bone augmentation; in all other cases and in all other areas, a flapless surgery was carried out. After the surgery was completed, the temporary fixed full-arch provisional in resin with metal framework was carefully adapted and relined on temporary abutments, removed, accurately polished, and then delivered to the patient (Fig. 7a). This fixed full-arch temporary was cemented and a panoramic radiograph was taken (Fig. 7b). Six months after surgery, when the period of provisionalization ended, the clinician recalled the patient and took two different impressions: (i) generic alginate impressions with the provisional prostheses in position; and (ii) precision impression with polyether open tray over multi-unit intermediary abutments, to avoid damaging the peri-implant structures (Fig. 8a, b). These two impressions were sent to the dental laboratory, where plaster casts were poured and scanned with the same aforementioned desktop scanner. These models were then overlapped in a computer-assisteddesign (CAD) software, in order to have a guide for modeling the final restorations and performing aesthetic modifications (Fig. 9a). All these modifications, however, were done manually, on 3D-printed models (Fig. 9b, c). Then the final shapes were scanned again. At this point, the dental technician could proceed to design, in a CAD software (Exocad ®, Darmstadt, Germany), the final individual, customized abutments (which had to be cemented extraorally on selected titanium bases) and the final restorations (Fig. 10a, b, c). Both the individual, customized abutments and the final restorations were full-ceramic and milled in zirconia with a powerful milling machine (M1 WET Heavy Metal®, Zirkonzhan, Bolzano, Italy), in order to improve the aesthetic outcome. The restorations had to be single crowns (in the frontal area, for a better biological response, with physiological auto-detersion, and to allow for excellent oral hygiene maneuvers, such as the passage of dental floss) and fixed partial prostheses (in the posterior areas, to improve the functional response). At the delivery of the final restorations, the customized abutments were screwed in the correct position: the margins were positioned subgingivally, in accordance with the original surgical and prosthetic plan (Fig. 10d) and all restorations were placed. The marginal adaptation was checked clinically using magnifying glasses (Zeiss 4.5x®, Zeiss, Oberkochen, Germany) and the occlusion was carefully evaluated using articulating papers (Bausch Articulating Paper®, Bausch Inc., Nashua, NH, USA) as well as digital devices (Tekscan®, Boston, MA, USA) prior to cementation. Clinical pictures (Fig. 11a, b) and a panoramic radiograph (Fig. 11c) were taken, along with a digital analysis of the occlusion (Fig. 11d).

Fig. 5
Preparation of the temporary fixed full arch for immediate loading. a, b After CAD design, a burn-out framework based on the prosthetic project and virtual implant position was milled. c This led to a metal structure on which resin composite was manually stratified, in order to obtain a highly aesthetic temporary full-arch prosthesis for immediate loading

Outcome measures
The outcome measures for the present study were implant stability at placement, implant survival, complications, prosthetic success, marginal bone remodeling, soft-tissue stability, and patient satisfaction.

Implant stability at placement
Implant stability was measured at placement. Insertion torque (IT) and resonance frequence analysis (RFA) were used as methods for measuring implant stability, as previously described ⁷⁵Zita Gomes R, de Vasconcelos MR, Lopes Guerra IM, de Almeida RAB, de Campo Felino AC. Implant stability in the posterior maxilla: a controlled clinical trial. Biomed Res Int. 2017;2017:6825213.^,76Bechara S, Kubilius R, Veronesi G, Pires JT, Shibli JA, Mangano FG. Short (6- mm) dental implants versus sinus floor elevation and placement of longer (=10-mm) dental implants: a randomized controlled trial with a 3-year follow-up. Clin Oral Implants Res. 2017;28(9):1097–107.. IT was measured before the removal of the surgical guide. Since all implants were placed using the implant motor, a standard IT of 50 Ncm was set at placement. If the machine-driven insertion was discontinued because of high IT (> 50 Ncm), the implant insertion was completed manually, through the guide, with a dedicated wrench. Conversely, if the final IT was < 45 Ncm, the full procedure was guided by the implant motor. The IT was considered poor when < 35 Ncm. Finally, RFA was used to confirm the stability of each implant, immediately after implant placement, after the removal of the guide. For each implant, the average value from 4 different measurements (buccal, palatal, mesial, and distal) was obtained. The stability of the fixture was considered acceptable with an implant stability quotient (iSQ) ranging from 55 to 85, low with an iSQ < 55. Regardless of the stability value that emerged, all implants were subjected to immediate functional loading, splinted through a temporary full-arch restoration.

Fig. 6
Extraction of the compromised teeth and guided implant surgery. a Ten compromised teeth were extracted in the maxilla and (b) five teeth in the mandible. c Superior guide in position. The guide was stabilized and supported by the teeth #15, #25, the hard tissues of the maxillary ridge and palate. d The surgeon performed the implantation through the guide, for a fully guided procedure, so that an aesthetically driven positioning of the implants was achieved. e After removal of the guide, it is evident how buccal tissues have been preserved, in order to achieve a highly predictable aesthetic outcome

Implant survival
An implant was classified as “surviving” if still functioning regularly at the 1-year follow-up control. Conversely, in all cases in which the implant failed and had to be removed, it was classified as “failed.” The reasons for implant failure were:

1. mobility due to lack of osseointegration, in the absence of clinical symptoms/signs of infection (pain, suppuration, exudation), during the healing period (i.e., the period of provisionalization) or after the delivery of the final restoration;
2. infection with pain, suppuration, exudation, related bone loss (peri-implantitis), and implant loosening;
3. progressive marginal bone loss due to occlusal overloading, in the absence of clinical symptoms/ signs of infection (pain, suppuration, education);
4. fracture of the fixture.

Complications
The assessment of immediate operative/ post-operative, biologic, and prosthetic complications included identification of any problem or complication that had affected the guided implant procedures and the implantsupported restorations, from the initial surgery until the end of the 1-year follow-up period. Complications were divided into immediate operative / post-operative (related to the guided surgery procedure), biologic, and prosthetic. Biologic and prosthetic complications could be early or late, according to when they occurred: a complication was defined as early if it occurred no later than the third month after implant placement; conversely, a complication was late if it occurred more than 3months from implant placement.

Fig. 7
Immediate loading and panoramic control radiograph. a Temporary Prosthesis in position 3 days after surgery. b Post-operative situation: panoramic radiograph. During surgery, one more mandibular tooth had to be extracted and replaced by an implant

Fig. 8
Final intraoral impressions. a Impression taking with open tray over multi-unit intermediary abutments, to avoid the damaging of the periimplant structures. b This analogic procedure was considered at the time the most precise for full arch

Fig. 9
Aesthetic refinement. a the clinician took an alginate impression of the provisionals in place, and a precision impression in polyether with open tray, to capture the position of the implants. These impressions were sent to the dental technician who poured plaster models and scanned them. These models were then overlapped in a CAD software, in order to have a guide for modeling the final restorations and to perform aesthetic modifications. All these modifications, however, were done manually, on 3D printed models. Then, the final shapes were scanned again

Immediate operative/ post-operative complications were

1. bad adaptation of the surgical guide, i.e., a nonperfect adaptation of the surgical guide when positioning and fixing it;
2. fracture of the surgical guide during surgery, including partial and incomplete fractures of the template structure, which occurred during the preparation of the surgical sites and the positioning of the implants;
3. insufficient implant stability at the removal of the surgical guide;
4. aberrant implant position with buccal bone dehiscence;
5. intra-operative bleeding;
6. lack of passive fitting of the immediate resin prosthesis.

Biologic complications were

1. post-operative pain and/or swelling;
2. peri-implant mucositis, i.e., superficial inflammation of the peri-implant tissues with involvement of the soft tissues only, characterised by mild discomfort, swelling, and gingival reddening, in the absence of any radiographic evidence of marginal bone loss;
3. peri-implantitis, i.e., deep infection of the periimplant tissues with involvement of the bone tissue, characterised by pain or discomfort on occlusion, suppuration/exudation, abscess, fistula formation, and/or advanced marginal bone loss (≥2.5 mm);
4. progressive marginal bone resorption in the absence of any kind of infection, i.e., a radiographic peri-implant bone loss > 1.5mm after the first year of function, and/or exceeding 0.2mm each following year.

Finally, prosthetic complications were

1. mechanical complications, i.e., complications that occurred on pre-formed components and part of the implant system, such as unscrewing of the connecting screw and loss of connection between the implant and the abutment (abutment screw loosening), fracture of the connecting screw (abutment screw fracture), or fracture of the prosthetic abutment;
2. technical complications, i.e., complications on prosthetic parts designed and built by the dental technician, such as customized zirconia individual abutments and prosthetic restorations (whether temporary or definitive). Among these complications were fracture of the individual abutments as well as fracture or chipping of the prosthetic restorations.

Prosthetic success
An implant-supported prosthetic restoration was considered successful if it did not present any failure or complication, either of a biological or a prosthetic nature, throughout the entire course of the study, i.e., from the moment of placement with the immediate functional load of the temporary restoration, until replacement with the definitive restoration, and for the whole period in which the definitive restoration remained in situ, from delivery up to the 1-year follow-up control. The possible complications that could occur were the aforementioned procedural, biological, and prosthetic complications, which could affect the implants and/or the prosthetic structure.

Soft-tissue stability
The soft-tissue stability was verified from clinical photographs, taken at the placement of the definitive restoration and at the 1-year follow-up, with the same digital camera (d7100®, Nikon, Tokyo, Japan) under the same settings (distance 0.6 m, f 22). Only the area of the smile, from the first right premolar to the first left premolar was investigated. The authors compared the stability of the tissues on these frontal pictures, focusing their attention on the stability of the papillae and the soft-tissue contours, using a novel index modified from Furhauser ⁷⁷Furhauser R, Florescu D, Benesch T, Haas R, Mailath G, Watzek G. Evaluation of soft tissue around single-tooth implant crowns: the pink esthetic score. Clin Oral Implants Res. 2005;16(6):639–44..

Fig. 10
Final CAD/CAM procedures and clinical application. a CAD design of individual zirconia abutments. These abutments were designed for extraoral cementation on titanium bases. b The milled zirconia abutments glued on titanium bases. c The milled zirconia abutments placed on the model. d The milled zirconia abutments placed in the patient’s mouth. The abutment margins were planned 0.5mm below the gingival margin

Patient satisfaction
At the 1-year follow-up control, each patient was asked to fill out a patient satisfaction questionnaire consisting of 4 different questions. The questions read as follows:

1. Overall, how satisfied are you with the treatment received?
2. Are you satisfied with the function of your implantsupported restorations?
3. Are you satisfied with the aesthetics of your implant-supported restorations?
4. Are you satisfied with the cleanability of your implant-supported restorations?

For each question, the patient could give 5 possible replies: a) very satisfied; b) satisfied; c) neither satisfied nor dissatisfied; d) dissatisfied; e) very dissatisfied.

Statistical evaluation
All patients’ data were rigorously collected during the study and entered on a spreadsheet for statistical analysis (Excel 2003; Microsoft, Redmond, WA, USA). Descriptive statistics were used to describe the distribution of patients, implants, and restorations. For all qualitative variables (gender, systemic health, smoking habit, distribution of implants per site, position, length, diameter, distribution of restorations), values were expressed in absolute terms and in percentages (%); then, homogeneity or non-homogeneity in the distribution of patients (per gender, age classes, systemic health conditions, and smoking habit), implants (per site and position, length, and diameter), and restorations (per site and type) was calculated using the chi-square test (a statistically significant difference was reported with p < 0.05). For quantitative variables (age at surgery), the means, standard deviations (SD), medians, ranges, and 95% confidence intervals (CI) were calculated. The incidence of implant failures and complications was calculted and expressed in absolute values and in percentages (%). Implant survival was calculated at both the implant level and the patient level; with the patient as the statistical unit, he/she was classified as failure even if only one implant failure occurred. Similarly, the prosthetic success was calculated at both the restoration level and the patient level; with the patient as statistical unit, the presence of even a single complication (biologic or prosthetic) determined the allocation of the patient into the category of failure.

Fig. 11
Delivery of the final restorations. a Healthy and aesthetic aspect of the restorations. b Intraoral picture. c Final panoramic radiograph. d Occlusal control with Tekscan®. The stability of the occlusal situation was checked after delivery and in the recall sessions, at least once a year

Results

Patient population, implant distribution, and prostheses
A total of 12 patients (5 males and 7 females, mean age 50.0 ± 13.8 years, median age 54.5 years, CI 95% 42.2–57.9 years) were enrolled in the present retrospective clinical study; 110 implants (65 of them post-extractive) were installed, immediately loaded by means of a provisional fixed full arch. After 6 months of provisionalization, then, 72 fixed prosthetic restorations (53 single crowns, 17 bridges, and 2 fixed full arches) were delivered, in order to prosthetically reconstruct the complete arch. The distribution of patients is summarized in Table 1. The patients’ groups were homogeneous in distribution according to gender (p = 0.563) and age class (p = 0.738), whereas most of the patients were systemically healthy (p = 0.049, with only 2 patients with diabetes mellitus and 2 others with autoimmune diseases) and non-smokers (p = 0.008, with only 3 smoking patients). The distribution of the implants is summarized in Table 2. Most of the implants were placed in the maxilla (p < 0.001), but the distribution of the fixtures was homogeneous per position (p = 0.735). However, the distribution of the fixtures was non-homogeneous per length (p < 0.001, with most of the placed fixtures being 11 or 13mm in lenght) and per diameter (p = 0.001, most of the installed fixtures being 4.3, 5.1, and 6mm in diameter). Finally, the distribution of the prosthetic restorations is summarized in Table 3. Most of the 72 fixed restorations (45) were delivered in the maxilla, versus only 27 delivered in the mandible, and there was a statistically significant difference in the number of restorations between maxilla and mandible (p = 0.033), with the groups that were considered non-homogeneous. Similarly, most of the restorations delivered in this retrospective clinical study were single-crown (53) or short-span restorations (17); thus there was a statistically significant difference in the distribution of the restorations, per type (p < 0.001). Table 1 Patient distribution

* p = χ2 test. A statistically significant difference in the distribution of patients was set with p < 0.05

Table 2 Implant distribution

* p = χ2 test. A statistically significant difference in the distribution of patients was set with p < 0.05

Table 3 Prosthetic restoration distribution

* p = χ2 test. A statistically significant difference in the distribution of patients was set with p < 0.05

Implant stability
The mean implant stability at placement, as measured by IT and RFA (iSQ), is summarized in Table 4.

Implant survival
Two implants failed and had to be removed, in the same 57-year-old diabetic female patient. The patient was a light smoker. These implants were lost in the posterior maxilla because they failed to osseointegrate 1 month after surgery and before the final restorations were delivered. Thus, the 1-year implant-based survival rate was 98.2% (108/110 surviving implants). Considering the patient as a statistical unit, with one patient experiencing implant failure and therefore categorized as failure, the 1-year patient-based survival rate was 91.6% (11/12 patients not having any implant failure).

Complications
During guided surgery procedures, no complications were reported. All surgical guides showed an excellent fit and were sufficiently resistant not to break during the insertion of the fixtures. All implants were sufficiently stable at the removal of the guides and they appeared to be in the planned position, without any evident mistake or aberrant positioning. The immediate provisional fixed full arch was easily adapted on the fixture after implant placement. In addition, over the 1-year follow-up period, no major biological complications affected the surviving (108/110) implants. Two patients had peri-implant mucosal inflammation with bleeding on probing around two post-extraction implants after 3months, but the improved oral hygiene reduced the inflammation. No peri-implantitis occurred, nor progressive marginal bone resorption. The incidence of biologic complications amounted to 1.8% (2/108 implants). No issues were registered with the provisional restorations. With regard to the final implantsupported fixed restorations, only two single crowns underwent abutment screw loosening; these abutments were re-screwed and no further loosening was reported. The incidence of mechanical complications was therefore 1.8% (2/ 108) implants. No technical complications were reported.

Prosthetic success
Considering the implant failures that occurred and the different biologic and prosthetic complications that were encountered, the 1-year prosthetic success of this study amounted to 66.6% (8/12 prostheses did not undergo any failure or complication).

Table 4 Distribution of the insertion torque (IT) and implant stability quotient (ISQ) measured at placement

Soft-tissue stability
The photographic analysis revealed little or no differences between the pictures taken at the delivery of the final restorations and those at the 1-year controls. A certain degree of maturation of soft tissues was also evidenced, with growth of inter-implant papillae and adequate stability of soft-tissue contours.

Patient satisfaction
The results of the patient satisfaction questionnarie are summarized in Table 5. The great majority of patients were satisfied with the treatment received (Fig. 12a, b, c, d, e) and no patients reported being dissatisfied when answering the 4 questions asked in the questionnaire.

Discussion

Although guided surgery has become increasingly popular and widespread, there are currently only a few studies in the literature that present the results obtained with the guided flapless placement of implants in postextraction sockets and their immediate functional loading by means of complete fixed-arch reconstructions without artificial gum ⁷⁸Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.^,79Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33.^,80Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.^,81Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423..

Most of the studies in the literature, in fact, refer to the immediate loading of hybrid prostheses (such as Toronto Bridges, “all-on-four,” and “all-on-six” dentures), characterized by the presence of a bar connecting the implants and, more relevant, artificial gum ⁸²Daas M, Assaf A, Dada K, Makzoumé J. Computer-Guided Implant Surgery in Fresh Extraction Sockets and Immediate Loading of a Full-Arch Restoration: A 2-Year Follow-Up Study of 14 Consecutively Treated Patients. Int J Dent. 2015;2015:824127.^,83Browaeys H, Dierens M, Ruyffelaert C, Matthijs C, De Bruyn H, Vandeweghe S. Ongoing Crestal Bone Loss around Implants Subjected to Computer- Guided Flapless Surgery and Immediate Loading Using the All-on-4® Concept. Clin Implant Dent Relat Res. 2015;17(5):831–43.^,84Yamada K, Hoshina H, Arashiyama T, Arasawa M, Arai Y, Uoshima K, Tanaka M, Nomura S. Immediate implant loading following computer-guided surgery. J Prosthodont Res. 2011;55(4):262–5.^,85Allum SR. Immediately loaded full-arch provisional implant restorations using CAD/CAM and guided placement: maxillary and mandibular case reports. Br Dent J. 2008;204(7):377–81.^,86Montero J, Macedo de Paula C, Albaladejo A. The “Toronto prosthesis”, an appealing method for restoring patients candidates for hybrid overdentures: A case report. J Clin Exp Dent. 2012;4(5):e309–12.. It is obvious how such prosthetic rehabilitations differ so thoroughly from a full-arch fixed prosthesis, which is characterized by the absence of artificial gum and much more delicately manageable for the clinician, from an aesthetic point of view ⁸⁷Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.^,88Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33.^,89Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.^,90Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423..

In a recent clinical and radiographic study on implants placed in post-extractive and healed sites, inserted using flapless guided surgery, and immediately loaded, Ciabattoni et al. ⁹¹Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008. have reported successful clinical results. In that study, 285 implants were installed in 32 patients with a double-guide template technique ⁹²Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.; in detail, 197 implants were inserted in fresh extraction sockets (137 maxilla, 60 mandible) and 88 in healed sites (58 maxilla, 30 mandible). All implants were immediately loaded by means of fixed full-arch restorations and followed for a period of 3 years ⁹³Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.. The outcome variables were implant survival, prosthesis survival, and marginal bone levels ⁹⁴Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.. At the end of the study, a high implant survival rate (97.5%) was reported, with only 7 fixtures failed (3 in fresh extraction sockets of the maxilla, 2 in fresh extraction sockets in the mandible, and 2 in maxillary healed sites) ⁹⁵Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.. All fixed full arches maintained stability and good functionality during the entire follow-up. Finally, the marginal bone loss accounted to 1.32mm (± 0.41) at the 3-year follow-up control ⁹⁶Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.. The authors concluded that flapless guided implant surgery with the double-guide template technique is a predictable treatment procedure, capable of guaranteeing predictable outcomes while decreasing length of treatment time and patient discomfort ⁹⁷Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008..
Table 5 Patient satisfaction wth the treatment received

Fig. 12
One year follow-up control. a Detail of the aesthetic integration. b, c, d, e Life changing dentistry: the patient is happy with complete rehabilitation, satisfactory aesthetic and functional results

Polizzi et al. investigated the clinical and radiographic outcomes of immediate fixed restorations on maxillary implants, inserted in fresh extraction and healed sites by using the NobelGuide® system ⁹⁸Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33.. Twenty-seven patients were included in the study and were treated with flapless guided implant surgery and immediate full-arch or partial restorations. The patients were followed for a period of up to 5 years and the clinical outcomes were implant survival, marginal bone remodeling, soft-tissue parameters, and complications ⁹⁹Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33.. Among the 160 implants assessed, only four failures were reported, for a cumulative survival rate of 97.3%. At the end of the study, all prostheses were functioning. The marginal bone resorption from insertion to 2 years amounted to 0.85mm (± 1.28); from insertion to the last radiographic control was 1.39mm (± 1.88); and between 2 years and the last control was 0.64mm (± 1.66) ¹⁰⁰Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33.. Finally, the soft-tissue response was excellent and only a few minor complications were reported ¹⁰¹Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33..

In 2013, Meloni et al. ¹⁰²Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5. reported on a guided implant surgery protocol for the immediate delivery and functional loading of screw-retained provisional metalacrylic full-arch prostheses. In total, 60 implants were placed in 10 patients: among these implants, 22 were inserted in fresh extraction sockets ¹⁰³Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.. The final prostheses were delivered after 6 to 12 months. All patients were followed for a period of at least 1 year ¹⁰⁴Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.. The outcome measures of this study were implant survival, patient satisfaction, and marginal bone loss ¹⁰⁵Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.. At the end of the study, no implants were lost, for a survival rate of 100%; in addition, no complications (either biological or prosthetic) were reported ¹⁰⁶Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.. All patients felt comfortable with the treatment procedures and were fully satisfied with the final functional and aesthetic result ¹⁰⁷Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.. Finally, the mean marginal bone loss amounted to 1.4mm (± 0.3) ¹⁰⁸Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5..

In a subsequent prospective clinical study, which represented the development of the previous one, the same researchers reported on the clinical and radiographic outcomes of 20 patients treated with guided implant surgery and immediate loading of computer-assisteddesign/ computer-assisted-manufacturing (CAD/CAM) fixed full-arches ¹⁰⁹Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423.. In total, 120 fixtures were installed in 23 jaws, supporting immediately loaded fixed full-arch prostheses ¹¹⁰Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423.. After 30 months, the implant survival rate was 97.7%, with only minor prosthetic complications encountered, a marginal bone remodeling of 1.08 mm (± 0.34), a mean probing-pocket-depth value of 2.84mm (± 0.55), and a mean bleeding-on-probing of 4% (± 2.8%) ¹¹¹Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423.. The authors concluded that guided implant surgery and immediate functional loading of fixed full arches represent a viable option for the treatment of completely edentulous jaws ¹¹²Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423..

The results of our present study seem to confirm the evidence emerging from the aforementioned literature ¹¹³Ciabattoni G, Acocella A, Sacco R. Immediately restored full arch-fixed prosthesis on implants placed in both healed and fresh extraction sockets after computer-planned flapless guided surgery. A 3-year follow-up study. Clin Implant Dent Relat Res. 2017;19(6):997–1008.^,114Polizzi G, Cantoni T. Five-year follow-up of immediate fixed restorations of maxillary implants inserted in both fresh extraction and healed sites using the NobelGuide™ system. Clin Implant Dent Relat Res. 2015;17(2):221–33.^,115Meloni SM, De Riu G, Pisano M, Tullio A. Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. J Maxillofac Oral Surg. 2013;12(3):321–5.^,116Meloni SM, De Riu G, Pisano M, Lolli FM, Deledda A, Campus G, Tullio A. Implant Restoration of Edentulous Jaws with 3D Software Planning, Guided Surgery, Immediate Loading, and CAD-CAM Full Arch Frameworks. Int J Dent. 2013;2013:683423.. In our present study, 12 patients received 110 implants (65 of them post-extractive), placed flapless through a guided surgery procedure and then immediately loaded by means of a provisional fixed full arch. After a provisionalization period of 6 months, 72 fixed prosthetic restorations were delivered, in order to prosthetically reconstruct the complete arch. The implant stability at placement was successful. Only two implants failed and were removed, in one single patient, for a 1-year implant survival rate of 98.2% (108/110 surviving implants). A few biologic and prosthetic complications were reported, with 8/12 prostheses that did not undergo any failure or complication during the entire follow-up period. At the 1-year follow-up control, excellent soft-tissue stability was found, and patients were satisfied with the treatment.

The advantages of our present guided surgical and prosthetic protocol can be summarized as follows. First, the flapless implant placement can reduce intra- and postoperative patient discomfort and morbidity, as indicated by different systematic reviews ¹¹⁷Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901.^,118Hultin M, Svensson KG, Trulsson M. Clinical advantages of computer-guided implant placement: a systematic review. Clin Oral Implants Res. 2012;23: 124–35. and clinical studies ¹¹⁹Marra R, Acocella A, Alessandra R, Ganz SD, Blasi A. Rehabilitation of Full- Mouth Edentulism: Immediate Loading of Implants Inserted With Computer-Guided Flapless Surgery Versus Conventional Dentures: A 5-Year Multicenter Retrospective Analysis and OHIP Questionnaire. Implant Dent. 2017;26(1):54–8.^,120Arisan V, Karabuda CZ, Ozdemir T. Implant surgery using bone- and mucosa-supported stereolithographic guides in totally edentulous jaws: surgical and post-operative outcomes of computer-aided vs. standard techniques. Clin Oral Implants Res. 2010;21:980–8.^,121Arisan V, Bölükbasi N, Öksüz L. Computer- assisted flapless implant placement reduces the incidence of surgery-related bacteremia. Clin Oral Investig. 2013;17:1985–93.. In fact, this minimally invasive approach significantly reduces the time required for surgery ¹²²Marra R, Acocella A, Alessandra R, Ganz SD, Blasi A. Rehabilitation of Full- Mouth Edentulism: Immediate Loading of Implants Inserted With Computer-Guided Flapless Surgery Versus Conventional Dentures: A 5-Year Multicenter Retrospective Analysis and OHIP Questionnaire. Implant Dent. 2017;26(1):54–8.^,123Arisan V, Karabuda CZ, Ozdemir T. Implant surgery using bone- and mucosa-supported stereolithographic guides in totally edentulous jaws: surgical and post-operative outcomes of computer-aided vs. standard techniques. Clin Oral Implants Res. 2010;21:980–8.. In a controlled study, Arisan et al. demonstrated that the flapless guided surgery can significantly shorten surgical time, as compared to the conventional open-flap surgery ¹²⁴Arisan V, Karabuda CZ, Ozdemir T. Implant surgery using bone- and mucosa-supported stereolithographic guides in totally edentulous jaws: surgical and post-operative outcomes of computer-aided vs. standard techniques. Clin Oral Implants Res. 2010;21:980–8.. Since the duration of the surgical intervention influences morbidity for the patient, computer-assisted flapless implant placement can reduce the incidence of surgeryrelated complications, such as bacteremia and infections ¹²⁵Arisan V, Bölükbasi N, Öksüz L. Computer- assisted flapless implant placement reduces the incidence of surgery-related bacteremia. Clin Oral Investig. 2013;17:1985–93.. Fortin at al. have demonstrated that the optimization of implant placement, through guided surgery, may be an option to successfully avoid having to use bone augmentation procedures ¹²⁶Fortin T, Isidori M, Bouchet H. Placement of posterior maxillary implants in partially edentulous patients with severe bone deficiency using CAD/CAM guidance to avoid sinus grafting: a clinical report of procedure. Int J Oral Maxillofac Implants. 2009;24:96–102.. But for the clinician, the main advantage in the use of guided surgery is the possibility of planning the implants (at the requisite position, inclination, and depth) in the best possible way, avoiding dangerous anatomical structures (inferior alveolar nerve and maxillary sinus) and taking into account the emergence profiles and the overlying prosthesis. It is the so-called “prosthetically guided” placement, where the implants are planned in the best possible way to support the prosthesis, which reduces the need of prosthetic compromises. In fact, during the planning of the fixtures in the software, the prosthetic suprastructure is imported and included; hence, the optimal position of the implants (depth, mesiodistal, bucco-lingual as well as inclination) in relation to the future prosthetic rehabilitation can be obtained. As such, the fixtures can be planned to support a prosthesis that provides the functional, biologic, and aesthetic requirements and at the same time the anatomy of the bone as well as prosthetic boundaries can be taken into account. In the present study, care was taken to plan the implants in the best position, depth, and inclination, in order to engage the fixtures as much as possible in the residual bone (exceeding the apex of fresh extraction sockets at least 3– 4mm) to maximize stability, and at a distance of 2–3mm from the residual buccal bone walls, to avoid aesthetic problems. At the same time, however, the planning was prosthetically guided, with the axis of the implants that had to be, as much as possible, in the center of the teeth. The final planning was the result of a compromise between the residual amount of bone available, and the ideal prosthetic emergence profile. This is not a trivial matter, particularly when a fixed full arch without artificial gum is planned; in fact, with guided implant surgery, the improved accuracy in implant placement can provide a better platform for the final prosthetic restoration. Immediately after surgery, the pre-fabricated provisional full arch can be delivered to patients and loaded, improving patient satisfaction, comfort, and treatment acceptance, without the need to use any removable denture. The application of these prefabricated restorations results in acceptable success rates, as reported in the literature. In addition, the immediately loaded provisional restoration may guide the soft-tissue healing for an optimal aesthetic result with minimal recession, taking advantage also of the extraction socket healing potential.

In 2015, Furhauser et al. ¹²⁷Fürhauser R, Mailath-Pokorny G, Haas R, Busenlechner D, Watzek G, Pommer B. Esthetics of Flapless Single-Tooth Implants in the Anterior Maxilla Using Guided Surgery: Association of Three-Dimensional Accuracy and Pink Esthetic Score. Clin Implant Dent Relat Res. 2015;17(Suppl 2):e427–33. published a clinical study in which stereolithographic surgical guides were used to insert single-tooth implants for the replacement of upper incisors. The authors evaluated the accuracy in implant placement and the aesthetic result by means of the pink aesthetic score (PES) after a mean follow-up of 2.3 years ¹²⁸Fürhauser R, Mailath-Pokorny G, Haas R, Busenlechner D, Watzek G, Pommer B. Esthetics of Flapless Single-Tooth Implants in the Anterior Maxilla Using Guided Surgery: Association of Three-Dimensional Accuracy and Pink Esthetic Score. Clin Implant Dent Relat Res. 2015;17(Suppl 2):e427–33.. Even though guided, a mean deviation from the originally planned position of 0.84mm (measured at the implant shoulder) was found ¹²⁹Fürhauser R, Mailath-Pokorny G, Haas R, Busenlechner D, Watzek G, Pommer B. Esthetics of Flapless Single-Tooth Implants in the Anterior Maxilla Using Guided Surgery: Association of Three-Dimensional Accuracy and Pink Esthetic Score. Clin Implant Dent Relat Res. 2015;17(Suppl 2):e427–33.. However, the authors found that deviations ≥0.8mm resulted in significantly worse aesthetic results (median PES: 9.5) than with more accurate implant positions (median PES: 13, p = 0.039) ¹³⁰Fürhauser R, Mailath-Pokorny G, Haas R, Busenlechner D, Watzek G, Pommer B. Esthetics of Flapless Single-Tooth Implants in the Anterior Maxilla Using Guided Surgery: Association of Three-Dimensional Accuracy and Pink Esthetic Score. Clin Implant Dent Relat Res. 2015;17(Suppl 2):e427–33..

The issue of accuracy in transferring the implant position from the software to the surgery actually remains to be solved, as demonstrated by various studies ¹³¹Vercruyssen M, Cox C, Naert I, Jacobs R, Teughels W, Quirynen M. Accuracy and patient-centered outcome variables in guided implant surgery: a RCT comparing immediate with delayed loading. Clin Oral Implants Res. 2016; 27(4):427–32.^,132Vercruyssen M, Cox C, Coucke W, Naert I, Jacobs R, Quirynen M. A randomized clinical trial comparing guided implant surgery (bone- or mucosa-supported) with mental navigation or the use of a pilot-drill template. J Clin Periodontol. 2014;41(7):717–23. and literature reviews ¹³³Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,134D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,135Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.^,136Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901.^,137Hultin M, Svensson KG, Trulsson M. Clinical advantages of computer-guided implant placement: a systematic review. Clin Oral Implants Res. 2012;23: 124–35.. Therefore, considering that these deviations may depend on several factors that cannot be completely controlled ¹³⁸Vercruyssen M, Laleman I, Jacobs R, Quirynen M. Computer-supported implant planning and guided surgery: a narrative review. Clin Oral Implants Res. 2015;26(Suppl. 11):69–76.^,139D’haese J, Ackhurst J, Wismeijer D, De Bruyn H, Tahmaseb A. Current state of the art of computer-guided implant surgery. Periodontol. 2017;73(1):121– 33.^,140Colombo M, Mangano C, Mijiritsky E, Krebs M, Hauschild U, Fortin T. Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials. BMC Oral Health. 2017;17(1):150.^,141Hultin M, Svensson KG, Trulsson M. Clinical advantages of computer-guided implant placement: a systematic review. Clin Oral Implants Res. 2012;23: 124–35.^,142Vercruyssen M, Cox C, Naert I, Jacobs R, Teughels W, Quirynen M. Accuracy and patient-centered outcome variables in guided implant surgery: a RCT comparing immediate with delayed loading. Clin Oral Implants Res. 2016; 27(4):427–32.^,143Vercruyssen M, Cox C, Coucke W, Naert I, Jacobs R, Quirynen M. A randomized clinical trial comparing guided implant surgery (bone- or mucosa-supported) with mental navigation or the use of a pilot-drill template. J Clin Periodontol. 2014;41(7):717–23., it is advisable for clinicians to carefully select patients as candidates for guided surgery, especially at the beginning of their own learning path of the technique.

In the coming years, the continuous technological advancements in the world of digital dentistry, together with improvements in devices such as scanners ¹⁴⁴Van Assche N, Vercruyssen M, Coucke W, Teughels W, Jacobs R, Quirynen M. Accuracy of computer-aided implant placement. Clin Oral Implants Res. 2012;23(Suppl 6):112–23.^,145Mangano F, Gandolfi A, Luongo G, Logozzo S. Intraoral scanners in dentistry: a review of the current literature. BMC Oral Health. 2017;17(1):149. and software for planning and in the manufacturing of surgical guides ¹⁴⁶Joda T, Zarone F, Ferrari M. The complete digital workflow in fixed prosthodontics: a systematic review. BMC Oral Health. 2017;17(1):124., might actually reduce the inaccuracy of guided implant placement.

Moreover, in a recent systematic review of flapless guided surgery procedures, the authors have found excellent survival rates (97.2%) in the included studies and minimal mean marginal bone loss (1.45 mm) during 1– 4 years of follow-up ¹⁴⁷Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901.; however, complications were also found, such as insufficient primary implant stability at placement in the fresh extraction sockets, as well as occasional surgical guide fractures or fractures of the immediate provisional restoration ¹⁴⁸Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901.. Once again, the authors concluded that there is a learning curve to achieve complete treatment success; certainly, the selection of the case is important and it would be advisable to start with simpler cases, then gradually learning how to deal with more complex cases ¹⁴⁹Moraschini V, Velloso G, Luz D, Barboza EP. Implant survival rates, marginal bone level changes, and complications in full-mouth rehabilitation with flapless computer-guided surgery: a systematic review and meta-analysis. Int J Oral Maxillofac Surg. 2015;44(7):892–901..

Finally, the present study has certain limits, such as the limited number of patients enrolled and the short followup time. In addition, the retrospective is not the most suitable study design for obtaining indisputable scientific data ¹⁵⁰Mangano FG, Hauschild U, Admakin O. Full in-Office Guided Surgery with Open Selective Tooth-Supported Templates: A Prospective Clinical Study on 20 Patients. Int J Environ Res Public Health. 2018;15(11).^,151Spielau T, Hauschild U, Katsoulis J. Computer-assisted, template-guided immediate implant placement and loading in the mandible: a case report. BMC Oral Health. 2019;19(1):55.. Moreover, this study was performed following a mixed, digital-analog workflow and this could be considered as another limitation of the present research, since the use of intraoral scanners is today well established ¹⁵²Mangano F, Gandolfi A, Luongo G, Logozzo S. Intraoral scanners in dentistry: a review of the current literature. BMC Oral Health. 2017;17(1):149. and could potentially reduce the number of steps and procedures described here. Therefore, new studies should be conducted with a prospective design and possibly randomized controlled trials, in order to draw more specific conclusions on the validity and effectiveness of this technique.

Conclusions

In our present study, 12 patients received 110 implants (65 of them post-extractive), placed flapless through a guided surgery procedure and then immediately loaded by means of a provisional fixed full arch. After a provisionalization period of 6 months, 72 fixed zirconia-ceramic prosthetic restorations (53 single crowns, 17 bridges, and 2 fixed full arches) were delivered. The results showed a 1- year implant survival rate of 98.2% (108/110 surviving implants) and good soft-tissue stability.

Our present surgical and prosthetic approach presents several advantages. First, only one surgical session is required for tooth extraction, implantation and application of provisional prosthesis. For the patients social life, this concept allows a reduction of discomfort and facilite their return to professional life. For the dental rehabilitation, provisional restoration guides the soft-tissue healing for an optimal aesthetic result. Within the limitations of this study, combining a CBCT-derived surgical guide to an immediate implant placement in postextraction sockets together with immediate provisionalization and loading seems to be a safe and predictable therapy, with high survival rates and excellent aesthetic results, when applied in indicated cases. Further studies on larger samples of patients and with longer follow-up controls are needed to draw more specific conclusions about the long-term results with the present technique.

Abbreviations
3D: three-dimensional; BOP: Bleeding on probing; CBCT: Cone beam computed tomography; CT: computerized tomography; DICOM: digital imaging and communication in medicine; PES: pink aesthetic score; PPD: Probing pocket depth

Acknowledgments
The authors are grateful to Federico Manes, freelance CAD engineer, for help with the planning software.

Authors’ contributions
Conceptualization: HL, UH; Data curation: HL, UH; Formal analysis: RS, SG; Investigation: HL, UH; Methodology: HL; Project administration: RS, SG; Resources: HL; Supervision: SG; Validation: RS; Visualization: HL; UH; Writing original draft: HL; Writing review & editing: UH, SG. All authors have read and approved the manuscript.

Funding
The present study was self-funded.

Availability of data and materials
The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.

Ethics approval and consent to participate
This study was approved by the local Ethics Committee at the University of Frankfurt, Germany (approval number: #182/19). All patients were fully informed about the nature of this study and signed an informed consent form for this treatment.

Consent for publication
The authors obtained written consent for publication from the patients enrolled in this study.

Competing interests
The authors declare that they have no competing interests.

Author details
¹Baden-Baden, Germany. ²Department of Oral, Cranio-Maxillofacial and Facial Plastic Surgery, Johann Wolfgang Goethe-University, Frankfurt am Main, Germany. ³Department of Post-Graduate Medicine, Johann Wolfgang Goethe-University, Frankfurt am Main, Germany. ⁴Sanremo, Italy. ⁵Department of Oral, Cranio-Maxillofacial and Facial Plastic Surgery, Medical Center of the Goethe University Frankfurt, Frankfurt am Main, Germany. ⁶Institute of Pathology, University Medical Center, Johannes Gutenberg University, Mainz, Germany.

Leave a Reply

Be the First to Comment!

Please insert the code above to comment

Manage Subscriptions ∨

None
Notify of new replies to this comment
Notify of new replies to all my comments
Notify of all new follow-up comments

---